2017 Chevy Equinox Lug Nut Torque Specs - Truck Guider (2024)

ByZayn Posted onUpdated on

The 2017 Chevy Equinox lug nut torque specs are 90-100 ft/lbs when tightening. It is important to use a star pattern to ensure equal tension on all the lug nuts. Start with the bottom right and work clockwise, going around two or three times until the proper torque is achieved.

Be sure to check your owner’s manual for specific instructions regarding wheel installation and maintenance in order to avoid damage or injury due to improper wheel installation procedures. If using an impact wrench, be sure not to exceed 100 ft/lbs of rotation as this may cause excessive wear on wheel components over time.

When it comes to maintaining the integrity of your 2017 Chevy Equinox, one of the most important considerations is its lug nut torque specs. The correct torque specification for the lug nuts on a 2017 Chevy Equinox is between 95 to 105 foot-pounds. It’s essential that you use a torque wrench when tightening any lug nuts and ensure that all nuts are tightened evenly for optimal performance and safety.

2017 Chevrolet Equinox Wheel Nut Torque – what is it in the manual?

What Size are the Lug Nuts on a 2017 Chevy Equinox?

The lug nuts on a 2017 Chevy Equinox are M14 x 1.5 thread size, and measure 19 mm in diameter. It is important to make sure that you use the correct size for your vehicle when replacing or installing new lug nuts because an incorrect size can cause damage to the wheel studs and possibly lead to a loss of control while driving. Additionally, it is recommended by Chevrolet that you also replace all 5 lug nuts at once with new ones as this ensures uniform tension across all five bolts which helps ensure proper alignment of the wheels.

What Torque Should Lug Nuts Be Tightened To?

It is essential to know the correct torque for lug nuts when tightening them. This is because if you over-tighten or under-tighten, it can cause damage and reduce the life of your tyres. Generally speaking, most vehicles require a lug nut torque of between 80 ft/lbs and 100 ft/lbs (109 – 136 Nm).

It’s important to check with your vehicle manual as this may vary depending on your type of car and its wheel size. The best way to ensure that you are applying the right amount of torque is by using a high quality torque wrench. A good setting to start at would be 85ft/lb (115Nm) as this should cover most vehicles.

After applying the initial torque, take each lug nut in turn diagonally across from one another and re-torque again until all are tightened correctly at an even pressure throughout all four wheels; ensuring that no single lug nut has more tension than any other one. This will help ensure proper installation and balance which will result in increased safety while also preventing mechanical issues related to uneven tyre wear or tire detachment while driving.

What Do You Torque Lug Nuts to in a Chevy?

When changing the tires on a Chevy, it is important to make sure you have all the necessary tools and supplies. One of these essentials is a torque wrench that can help you properly fasten lug nuts to securely mount the wheels onto your vehicle. To ensure proper installation, Chevy recommends tightening each lug nut with a torque setting of between 80 and 100 ft-lbs (108-135Nm).

It is also recommended that after you have tightened each lug nut, use an additional 90° turn of the wrench for optimal security. If any one or more of the nuts are overtightened, they will be too tight and could cause damage to other components in addition to increasing stress on bearings and hub assemblies leading to accelerated wear in those areas.

What is the Torque on the Lug Nuts on a 2017 Chevy 2500?

The torque on the lug nuts of a 2017 Chevy 2500 is 150 lb-ft. This means that when installing or removing any wheel from your truck, you will need to apply 150 lb-ft of force in order to ensure proper fitment and safe operation. When tightening the lug nuts it is important to do so evenly and slowly in a crisscross pattern until all are tightened down securely – be sure not to overtighten as this can strip them out!

Additionally, when loosening or removing any wheel, always use an impact wrench with the appropriate socket size and never allow anyone else to sit inside the cab while you are working on the wheels as this can cause serious injury if something were to break loose unexpectedly.

Credit: www.sparkyexpress.ca

2015 Chevy Equinox Lug Nut Torque Specs

The 2015 Chevy Equinox requires a torque of 105-115 ft.-lbs. for its lug nuts. It is important to ensure that the correct amount of torque is applied when tightening the lug nuts, as an incorrect amount may cause damage to both the vehicle and wheels.

Additionally, it’s recommended that all five lug nuts be tightened in a criss-cross pattern in order to provide an even distribution across the wheel and prevent warping or uneven tire wear caused by an incorrect torque application.

2016 Chevy Equinox Wheel Torque Specs

The 2016 Chevy Equinox requires a torque of 103 lb.-ft. on the wheel nuts when mounting new tires.

It is important to use a tire iron with an accurate torque setting in order to avoid over-tightening or under-tightening the lug nuts and potentially damaging your vehicle’s wheels, suspension, steering system, and other components. Additionally, you should always check your owner’s manual for any additional specific instructions related to installing new wheels on your Chevrolet Equinox.

2013 Chevy Equinox Lug Nut Torque Specs

The 2013 Chevy Equinox requires a torque of 89 ft-lbs for the lug nuts. This is integral to ensure proper installation and prevent any loose lug nuts that could lead to accidents or other damaging scenarios. Make sure you use a quality torque wrench when tightening your lug nuts as not all wrenches are created equal.

Conclusion

In conclusion, the 2017 Chevy Equinox Lug Nut Torque Specs are very important to know when replacing or repairing tires on this vehicle. The torque specs should be followed precisely in order to ensure that your lug nuts are secure and won’t come loose while driving. It’s always best practice to use a torque wrench for greater accuracy and safety, as it will help you follow these specs exactly.

By following the proper procedure outlined here, you can make sure that your new tires stay properly fastened so you can enjoy worry-free driving with your 2017 Chevy Equinox!

  • 2017 Chevy Equinox Lug Nut Torque Specs - Truck Guider (2)

    Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

    View all posts

2017 Chevy Equinox Lug Nut Torque Specs - Truck Guider (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Margart Wisoky

Last Updated:

Views: 5421

Rating: 4.8 / 5 (58 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Margart Wisoky

Birthday: 1993-05-13

Address: 2113 Abernathy Knoll, New Tamerafurt, CT 66893-2169

Phone: +25815234346805

Job: Central Developer

Hobby: Machining, Pottery, Rafting, Cosplaying, Jogging, Taekwondo, Scouting

Introduction: My name is Margart Wisoky, I am a gorgeous, shiny, successful, beautiful, adventurous, excited, pleasant person who loves writing and wants to share my knowledge and understanding with you.